Announcements and general info will be available here, so when you log onto the store, visit this page first.
LOOK FOR THESE NEWEST ADDITIONS TO THE BELLM TCs LINE UP OF CUSTOM ACCESSORIES IN THE MENU LIST or click on the links below.
Correcting Headspace via Shims
We field a lot of problems related to headspace and have brought out the solution, firing pin bushing shims.
This article explains how to shim the firing pin bushing forward to correct headspace with new brass and loaded ammo.
Here is the set of shims to do the work: Bellm Encore Headspace Shims. |
|
New Information About Headspace
A MUST READ!
This article goes into more detail about the importance of headspace and how to measure it, along with measuring the distance from the rifling to the breechface.
|
|
Stainless Steel Headspace Indicator bases
Knowing what the headspace and the distance from the rifling to the breechface in any barrel and frame combination with any ammo is critical to your success with break open guns like the TC Encore or Contender/G2. Our Headspace Indicator Base is now availabe in knurled stainless steel. |
|
NEW! Triple Lock Hammer Extension
New design is held securely in place with two screws keyed into the grooves on top of the hammer spur plus the usual screw from the side of the hammer. These do not require overtightening which can bend the hammer spur, nor do they require gouging a groove into the side of the hammer to stay secure! |
|
SHOTS Gunsmith-Pistolsmith
has just teamed up with us offering frames and barrels at invoice price plus 10% and doing general TC Contender, Encore, and G2 frame and barrel repairs and scope mounting. |
|
| modified by Bellm TCs, Inc. from a standard Diamond EZE Lap specifically for altering Encore and G2 sear notches for more secure cocking of the hammer. This is a critical operation that MUST be done when the pull weight is reduced to the point that the hammer can readily be pushed off with moderate thumb pressure. |
|
| Heavy Duty Locking Bolt Springs |
|
| Bellm Custom Extra Strong "Speedlock" Hammer Springs |
|
NEW CURE FOR ENCORE AND G2 MISFIRES!
See our new custom Speedlock Hammer Springs for Encores and G2s. These are a must when the hammer spring has to be shortened to get it to rebound to half cock and when excess headspace and/or hard primers cause misfires.
|
|
| Put about 1/3 more force behind Encore, Contender, and G2 locking bolts so they engage more firmly into the frame for a tighter, more consistent barrel lock up. This enhances both accuracy and function of the barrel and frame and helps stop Contender misfires if the height of the locking bolts produces a marginal lockup of the barrel in the frame. Check this out. Encores need these the most! |
|
|
|
