NEW Encore Pro Hunter Endeavor FX Trigger Return Spring
CNC manufactured and heat treated from 302 stainless, our new Encore trigger return springs are designed to resist rust and corrsion yet do their job. Not a performance spring per say, so we put emphasis on the material and design.
The stock spring is prone to rusting, and seldom maintained like it should be. Don't take a chance, replace yours before it's too late.
Replacing the spring is something almost anyone can do, no gunsmith needed. With the grip and forend removed from receiver, remove the trigger guard threaded pin from the right side of frame, this is the threaded pin flat blade screwdriver bit about 5/16" width.
Next push out the smallest pin which is the trigger pin. I'm sure they make some kind of plier for this, but I normally just pull the C Clip with small needle nose pliers. Replace spring and re install in reverse order. For additional instructions on tear down and assembly, download or purchase our trigger job assembly manual now on sale.